Foton Auman BJ3251 Fault codes list of ECU and Engine
See also:
Foton trucks engine fault codes list in PDF
Title | File Size | Download Links |
Foton BJ3251 Fault codes list of ECU and Engine [PDF] | 88.8kb | Download |
Table of flashing fault codes – ECU and Engine
Description Fault | Possible Reasons Fault |
1-1-1 |
The problem with the built-in analog-to-digital converter (Ad) Ecu |
1-1-2 |
Problem With Synchronization Signals |
1-1-3 |
Problem With Synchronization Signals |
1-1-4 |
Problem With Synchronization Signals |
1-1-5 |
Problem with built-in output device Ecu |
1-1-6 |
Internal Error In ECU |
1-2-1 |
Problem With Trigger Relay |
1-2-2 |
The problem with the ignition switch in the position “ON» (T15 |
1-2-3 |
Problem with ignition switch in position «START» (T50) |
1-2-4 |
Problem With Battery |
1-2-5 |
Scheme of a non-monotonous spectrum of impulses Fmtc |
1-3-1 |
Built-in sensor power module Ecu |
1-3-2 |
Problem With Main Relay |
1-3-3 |
Pressure sensor in the fuel ramp |
Description Fault | Possible Reasons Fault |
1-3-4 |
Problem with pressure limit valve in common fuel ramp |
1-3-5 |
Problem with fuel dosing section |
1-3-6 |
Pressure limit valve in a common fuel ramp |
1-4-1 |
Problem with 1st cylinder nozzle |
1-4-2 |
Problem with 2nd cylinder nozzle |
1-4-3 |
Problem with nozzle 3-cylinder |
1-4-4 |
The problem with the nozzle 4-th cylinder |
1-4-5 |
The problem with the 5-th cylinder nozzle |
1-4-6 |
The problem with the nozzle 6-th cylinder |
1-5-1 |
The problem with condenser 1 (Control nozzles 1, 2,
3) |
1-5-2 |
The problem with condenser 2 (Control nozzles 4, 5,
6) |
1-5-3 |
Chip problem Cy33X Nozzle control |
1-5-4 |
Not reaching the minimum permissible limit of the correct nozzle |
1-5-5 |
limiting fuel injection to Ecu |
2-1-1 |
Availability Water In the Fuel |
2-2-1 |
Problems with pedal position sensors 1 and 2 |
Description Fault | Possible Reasons Fault |
2-2-2 |
Problem With Switch Clutch |
2-2-3 |
Problems with brake switch, single brake switch |
2-2-5 |
The problem with the reliability of the accelerator and brake |
2-2-6 |
Protection of the diesel engine (from the drift) |
2-2-7 |
Protection Diesel Engine |
2-2-8 |
Exceeding the permissible torque of the diesel engine |
2-2-9 |
Pedal Accelerator Remote Management |
2-3-1 |
Sensor Pressure Intake Air |
2-3-2 |
Sensor Atmospheric Pressure |
2-3-3 |
Sensor Temperature Intake Air |
2-4-1 |
Sensor Temperature Cooling Water |
2-4-2 |
High water temperature signal |
2-4-3 |
High/low oil pressure signal from oil pressure sensor |
2-4-4 |
Oil temperature sensor failure, high oil temperature signal |
Description Fault | Possible Reasons Fault |
2-4-5 |
Problem with water temperature sensor |
2-5-1 |
Problem with high-pressure fuel line/low-pressure fuel line (fuel leakage) |
2-5-2 |
Problem with high-pressure fuel line/low-pressure fuel line (fuel leakage) |
2-5-3 |
Problem with high-pressure fuel line/low-pressure fuel line (fuel leakage) |
2-5-4 |
Problem with high-pressure fuel line/low-pressure fuel line (fuel leakage) |
2-5-5 |
Problem with high-pressure fuel line/low-pressure fuel line (fuel leakage) |
2-5-6 |
Problem with high-pressure fuel line/low-pressure fuel line (fuel leakage) |
2-5-7 |
Problem with high-pressure fuel line/low-pressure fuel line (fuel leakage) |
2-6-1 |
Restore System Ecu |
2-6-2 |
Detection Schlepping |
2-6-3 | Чип ECU CJ940 |
2-6-4 |
Chip ECU and Watchdog |
Description Fault | Possible Reasons Fault |
2-6-5 |
Eeprom (Electrically erasable programmable memory is read-only) |
3-1-1 |
Solenoid Valve Exhaust Brakes |
3-1-2 |
Electromagnetic Fan valve (Pwm), Relay, Speed sensor |
3-1-3 |
Relay Compressor Air conditioner |
3-2-1 |
Relay Heating Intake Air |
3-2-2 |
Relay Heating Intake Air |
3-2-3 |
Relay Heating Intake Air |
3-2-4 |
Sensor Speed Movement |
3-2-7 |
Multi Switch |
3-3-1 |
Indicator State System |
3-3-2 |
Cold start indicator, signal indicator |
3-3-4 |
Indicator of water availability in fuel, signal indicator |
3-4-1 |
Switch Cruise control |
3-4-2 |
Switch Exhaust Brakes |
3-4-3 |
Starting Switch Remote Management |
Description Fault | Possible Reasons Fault |
5-1-1 |
Definition of the ignition pass in the 1st cylinder |
5-1-2 |
Definition of the ignition pass in the 2nd cylinder |
5-1-3 |
Definition of the ignition pass in the 3rd cylinder |
5-1-4 |
Definition of the ignition passes on cylinders |
5-3-1 |
Definition of the ignition pass in the 4th cylinder |
5-3-2 |
Definition of the ignition pass in the 5th cylinder |
5-3-3 |
Definition of the ignition pass in the 6th cylinder |
5-3-4 | External Check |
5-2-1 | External Check |
5-2-2 | External Check |
5-2-3 |
External Check |
5-4-1 |
Problem With Synchronization Signals |
Inline nine