Description

Actions of Block (Ecu)

Fault

Manifestation of Malfunction:

1

P1683

Short Circuit Short On Mass Additional Motor brake Output

Alarm Off

The “mass” of the output OUT6 37

The motor brake function is not working well.

1

P1684

SC on battery Complementary Motor Brake Output

Alarm Burns

KZ +In the exit OUT6 37

The motor brake function is not working well.

2

P1602

Code data Qr Have not been entered

Alarm Burns

Code data Qr Have not been entered (all equal zero)

Lower output power and Increase of toxic emissions, increase of engine noise and emissions of white Smoke

2

P0602

Data Code Qr Wrong

Alarm Burns

Code size Qr Incorrect Eeprom) Kqrsw

Shows 0, 1, 2

Lower output power and Increase of toxic emissions, increase of engine noise and emissions of white Smoke

2

P1601

Defining data for code Qr Incorrect (change definition Code Qr Wrong

Alarm not lit, the system does not work

Defining data For Code Qr Incorrect (for example, wrong order 40.80, 120,

140). This will not happen in mass production.

Lower output power and Increase of toxic emissions, increase of engine noise and emissions of white Smoke

3

P0607

Fault Cpu. Monitor the malfunction of the integrated circuit.

The alarm is lit, the cruise

Control does not work, RTO stopped, fuel supply limit 70%.

Malfunction of the additional Cpu (Monitoring the computer of the main Ecu)

Lower output power and Increased toxic emissions, increased engine noise and engine stalls

3

P0606

Fault Cpu, malfunction of the main Cpu

Alarm Burns Cruise control is not It’s working Rto MtplNovilos, fuel supply limit 70%.

Malfunction of the main Cpu (Getting Signal Additional faults Ecu)

Reduced output power and increased toxic emissions, increased engine noise and engine stalls

3

P0601

Check the area specified by the flashing code and errors

Alarm Burns Cruise control is not It’s working Rto MtplNovilos, fuel supply limit 70%.

Ecu Constantly spends Circular Check the area specified by the flashing code

Reduced output power and increased toxic emissions, increased engine noise, and engine stalls

5

P0686

Malfunction of the main relay Relay Zaliplo in Closed Able

Alarm Burns

When the relay does not work, the voltage is above 16 v.

When the ignition is switched off, the fault alarm continues to burn

6

P0217

Coolant temperature exceeds upper limit

The coolant temperature exceeds the upper limit of 107 C.

Overheating

7

P0219

Engine Exceeds Limit Momentum

Alarm Malfunction Not lit And cruise control is disabled

Rotation Below 2800, Warning Disappears

8

U0073

Error ECU CAN1

Alarm Off

“Mass” of wires 157 CAN1H

and 158 CAN1L

9

U1001

Error ECU CAN2

Alarm Burns

9

U0121

Abs Disconnected from the bus CAN

Abs Disconnected from the bus CAN

9

U0155

Device CAN Disconnected From Tires CAN

Device CAN Disconnected from the bus CAN

11

P0118

High coolant temperature sensor signal

The fault alarm is lit and the cruise control is disconnected

Break Signal wire Circuit 155Ad7

Noise and white smoke emissions increase

11

P0117

Low temperature sensor signal Cooling Liquid

EMCO on 55A-GND5

Signal Wires 155Ad7

Noise and white smoke emissions increase

12

P0342

Sensor G does not yield ripples

The fault alarm is lit and Kruizkontrol Disables

Gap Chain 120g

Unstable idling speed and poor start-up (possibly with black smoke ejection)

13

P0337

Sensor Ne does not yield ripples

Fault alarm lights, cruise control Disables And FCCB Disables

Gap Chain 40ne +

Unstable idle, poor engine start (possibly with black smoke) and engine Stalls.

13

P0385

No sensor pulses Ne And G

Simultaneous chain break 40Ne+ and 120G

Unstable idle, poor engine start (possibly with black smoke) and engine Stalls.

14

P0183

High oil temperature sensor signal

Alarm Burns

Break Signal wire Circuit 162Ad8

No visible signs of malfunction

14

P0182

Low oil temperature sensor signal

Alarm Burns

EMCO on 55A-GND5

Signal Wires 162Ad8

No visible signs of malfunction

15

P2229

High atmospheric pressure sensor signal

Alarm Burns

SC on 5v internal wire signal Ecu

15

P2228

Low atmospheric pressure sensor signal

Alarm Burns

“Mass” of the internal signal wire Ecu

Increase of white smoke emission, decrease of power, increase of emission toxicity, low engine power on horizontal road

16

P0113

High ambient air temperature sensor signal

Alarm Burns

Break Signal wire Circuit 32Ad16

Increase Toxic Emissions

16

P0112

Low ambient temperature sensor signal

Alarm Burns

EMCO on 55A-GND5

Signal Wires 32Ad16

Increase Toxic Emissions

17

P0523

High signal electronic pressure sensor of motor oil

Emco Of 57 A-VCC4 24 ad12

Reduced engine power and increased fuel consumption

17

P0522

Low signal of motor oil pressure electronic sensor

Short Circuit 24 ad12

Reduced engine power and increased fuel consumption

17

P0524

Low Pressure Motor Oil

The alarm is lit, the cruise control does not work, the RTO does not work, Limited tion 70% fuel supply.

Low motor oil pressure (defined Mpoilthl_D)

Reduced engine power and increased fuel consumption

21

P0503

High frequency car speed signal

The alarm is lit and Cruise control The switch off

Input Signal 27Vs1 above normal sensor frequency Vs

The cruise control function can not be used on the car.

The speed shown by the speedometer is different from the actual rate.

21

P0502

Or circuit break at the sensor inlet Speed Car

The alarm lights up and the cruise-Control off

Chain Break 27Vs1 and Kz On Mass Or

+B

It does not matter if this Code Flashing is served on the stand with running drums (stand is not connected to the sensor)

21

P0501

Wrong car speed sensor signal

The alarm lights up and the cruise control is switched off

Constant on/off state Entrance 27Vs1

It does not matter if this Code Flashing is served on the stand with running drums (stand is not connected to the sensor)

22

P0122

Low sensor signal Provisions Accelerator pedal 1

The alarm light is on and the cruise control is switched off

Signal Wire chain Break 21Ad1

Poor quality mounts, low engine power, low engine speed, no function work Motor Brake

22

P0123

High sensor signal Provisions Accelerator pedal 1

The alarm light is on and the cruise control is switched off

EMCO on 125A-Vcc2

Signal Wires 21Ad1

Poor quality mounts, low engine power, low engine speed, no function work Motor Brake

22

P0222

Low sensor signal Provisions Accelerator pedal 2

The alarm light is on and the cruise control is switched off

Signal wire chain Break 22Ad2

Poor quality mounts, low engine power, low engine speed, no function work Motor Brake

22

P0223

High sensor signal Provisions Accelerator pedal 2

The alarm is lit and

Cruise control Disables

EMCO on 123A-Vcc3

Signal Wires 22Ad2

Poor quality mounts, low power Engine, Low speed Engine does not work Motor function Brakes

22

P0121

Poor quality mounts, low power Engine, Low speed Engine does not work Motor function Brakes

22

P0221

Poor quality mounts, low power Engine, Low speed Engine does not work Motor function Brakes

22

P0120

Poor quality mounts, low power Engine, Low speed Engine does not work Motor function Brakes

22

P0220

Poor quality mounts, low power Engine, Low speed Engine does not work Motor function Brakes

22

P2120

Inefficient dual sensor position of the accelerator pedal

The alarm is lit and

Cruise control Disables

Simultaneous circuit break 21Ad1 and 22Ad2 Signal Wires

23

P0228

Low Signal From Rto

Signal Wire Chain Break 23Ad10

Not It’s working Function Rto

23

P0227

High Signal From Rto

EMCO on 65A-Vcc5

Signal Wires 23Ad10

Not It’s working Function Rto

25

P0541

Alarm Burns

Work Glow Heating)

Cold engine runs poorly

25

P0542

Alarm Burns

Exit circuit Break 70 OUT19 and 71 OUT20 or KZ on +B

Cold engine runs poorly

26

P0563

Alarm Burns

НAprjazhenie Systemss > 32 in

Engine BadAbout Starts

26

P0562

Alarm Off

Voltage в System < 15 B

Engine Not good Starts

28

P1681

Breaking the chain of motor brake or short circuit to “mass”

Alarm Burns

Gap Chain 36OUT5 и Kz

On Mass

The motor brake function cannot be used normally.

28

P1682

Alarm Burns

KZ +In the exit 36OUT5

37

P0238

High inlet air pressure sensor signal

Alarm Lit, and cruise control

Disables

EMCO on 57A-Vcc4

Signal Wires 128Ad3

37

P0237

Low ambient temperature sensor signal

Alarm Lit, and cruise control

Disables

Break Signal wire Circuit 128Ad3

37

P0236

Works poorly Inlet pressure sensor Air

Fault alarm is not lit And Cruise control Disables

128 Signal WireAd3 is loaded with alternating internal voltage of 5 V.

39

P0234

Pressure sensor signal Inlet Air exceeds the upper limit

PIM>TBOPH (MAP)

exceeds the upper limit

39

P0299

Pressure sensor signal Inlet Air below the lower limit

PIM<TBOPL (MAP)

Above the upper limit

41

P0704

Fault in the chain of the limit switch of the clutch

The alarm is lit and

Cruise control Disables

Chain Break 77 Sw27 (Car speed

> 80 km/h)

43

P1565

Malfunction in Circuit Breaker Cruise control

The fault alarm is lit and

Cruise control Disables

Abnormal Work Cruise- Control

44

P1143

High sensor signal Potentiometer Idle

Alarm Off

EMCO on 65A-Vcc5

Signal Wires 30Ad14

44

P1142

Low sensor signal Potentiometer Idle

Alarm Off

Signal Wire Circuit Break 30Ad14

45

P0617

Emco Of Akb

Switch Ignition

Alarm Burns

Chain Break 48Sw2 and KZ on the supply voltage on the wire 48

46

P1530

Jamming switch Engine Stuck or Closed

Alarm Burns

50SW4 ON

Abnormal flame ejection from the engine

47

P0850

Circuit malfunction Switch neutral Transfer

The alarm light is on and the cruise control is switched off

Chain Break 66 Sw9 (speed Car > 80 km/h)

Bad work functions RTO, cruise control, etc.

51

P0201

Rupture of the nozzle outlet circuit TWV1 and Detaching Electromagnetic Winding Nozzles

Gap Chain 103 TWV1

Reduced output power and increased toxic emissions, increased engine noise

52

P0202

Rupture of the nozzle outlet circuit TWV5 and disconnection of the electromagnetic winding nozzle

Gap Chain 105 twv5

Reduced output power and increased toxic emissions, increased engine noise

53

P0203

Rupture of the nozzle outlet circuit TWV3 and disconnection of the electromagnetic winding nozzle

Gap Chain 104 Twv3

Reduced output power and increased toxic emissions, increased engine noise

54

P0204

Rupture of the nozzle outlet circuit TWV6 and disconnection of the electromagnetic winding nozzle

Alarm Burns Cruise control is not It’s working FCCB Not It’s working Feed limit Fuel 70%.

Gap Chain 139 Twv6

Reduced output power and increased toxic emissions, increased engine noise

55

P0205

Rupture of the nozzle outlet circuit TWV3 and disconnection of the electromagnetic winding nozzle

Alarm Burns Cruise control is not It’s working FCCB Not It’s working Feed limit Fuel 70%.

Gap Chain 137 Twv2

Reduced output power and increased toxic emissions, increased engine noise

56

P0206

Rupture of the nozzle outlet circuit TWV4 and disconnection of the electromagnetic winding nozzle

Gap Chain 138 TWV4

Lower output power and Increased toxic Emissions and increased engine noise

57

P2148

Circuit on the battery of the nozzle chain Com1/KZ on battery Outputs TWV1 3 и 5

Alarm Burns Cruise control is not It’s working FCCB Not It’s working Fuel supply limit 50%.

Kz On +B Wires 106, 107 nozzles Com1 / Kz On +B On Wires 103, 104 and 105

Reduced output power and increased toxic emissions, increased engine noise

57

P2147

“Mass” of the nozzle chain Com1/KZ on the output battery TWV1, 3 and 5

Alarm Burns Cruise control is not It’s working FCCB Not It’s working Fuel supply limit 50%.

“Mass” in points 106, 107 nozzles Com1 / Kz On +B в Points 103, 104 и 105

Reduced output power and increased toxic emissions, increased engine noise

57

P2146

Break the output circuit under the nozzle load Com1/Break the output circuit under load TWV1, 3, 5

Alarm Burns Cruise control is not It’s working FCCB Not It’s working Fuel supply limit 50%.

Chain Break 106, 107 Nozzles Com1/Chain break 103, 104 и 105

Reduced output power and increased toxic emissions, increased engine noise

58

P2151

Circuit on the battery of the nozzle chain Com2/KZ on battery Outputs TWV2 4 и 6

Alarm Burns Cruise control is not It’s working FCCB Not It’s working Fuel supply limit 50%.

Kz On +B Wires 142, 143 Nozzles Com2 / Kz On +B Wires 137, 138

and 139

Reduced output power and increased toxic emissions, increased engine noise

58

P2150

“Mass” of the nozzle chain Com2/KZ on the output battery TWV2, 4 and 6

Alarm Burns Cruise control is not It’s working FCCB Not It’s working Fuel supply limit 50%.

“Mass” of wires 142, 143 Nozzles Com2/short-circuit on the “mass” of wires 137, 138 and 105

Reduced output power and increased toxic emissions, increased engine noise

58

P2149

Break output circuit Under Load Com2/Load Break circuit TWV2, 4, and 6

Chain Break 142, 143 Nozzles Com2/Chain Break 137, 138 и 139

59

P0611

Fault Chain Charge Condenser

Alarm Burns Cruise control is not It’s working FCCB Not It’s working 50% fuel supply limit and low pressure limit

Internal Fault Ecu

Reduced output power and increased toxic emissions, increased engine noise

59

P0200

Fault Chain Charge Condenser

Alarm Burns Cruise control is not It’s working FCCB Not It’s working Fuel supply limit 51% and low Limitations- tion Pressure

Internal Fault Ecu

Reduced output power and increased toxic emissions, increased engine noise

61

P0301

Circuit malfunction ToplivopoCylinder 1

Alarm Not lit, And the system does not work

The nozzle is damaged, Injection No fuel (definitionBut FCCB)

Engine shaking at idle, low engine power at full load, increased fuel consumption compared to normal conditions

61

P0263

It’s working Damper Flow

№1

Alarm not litAnd the system does not work

62

P0305

Circuit malfunction Toplivopo Cylinder Giving 5

Alarm not lit And the system does not work

Nozzle damaged, no fuel injection (DetermineLeno FCCB)

Engine shaking at idle, low engine power at full load, increased fuel consumption compared to normal conditions

62

P0266

It’s working Damper Flow

№5

Alarm not lit And the system does not work

63

P0303

Circuit malfunction Fuel Cylinder 3

Alarm not litAnd the system does not work

Nozzle damaged, no fuel injection (DetermineLeno FCCB)

Engine shaking at idle, low engine power at full load, increased fuel consumption compared to normal conditions

63

P0269

It’s working Damper Flow № 3

Alarm not litAnd the system does not work

64

P0306

Circuit malfunction Fuel Cylinder 6

Alarm not litAnd the system does not work

Nozzle damaged, no fuel injection (DetermineLeno FCCB)

Engine shaking at idle, low engine power at full load, increased fuel consumption compared to normal conditions

64

P0272

It’s working Damper Flow № 6

Alarm not litAnd the system does not work

65

P0302

Circuit malfunction Fuel Cylinder 2

Alarm not litAnd the system does not work

Nozzle damaged, no fuel injection (DetermineLeno FCCB)

Engine shaking at idle, low engine power at full load, increased fuel consumption compared to normal conditions

65

P0275

It’s working Damper Flow № 2

Alarm not litAnd the system does not work

66

P0304

Fuel circuit malfunction Cylinder 4

Alarm not litAnd the system does not work

Nozzle damaged, no fuel injection (DetermineLeno FCCB)

Engine shaking at idle, low engine power at full load, increased fuel consumption compared to normal conditions

66

P0278

It’s working Damper Flow

№4

Alarm not litAnd the system does not work

67

P0193

High pressure sensor signal in the fuel cell

Simultaneous break of signal wires circuit 21Ad1 and 132Ad5

Reduced output power and increased toxic emissions (with white smoke emissions), increased engine noise

67

P0192

Low pressure sensor signal in the fuel cell

Simultaneous short-circuit on 134A-Gnd1

121 Signal WiresAd4 and 132Ad5

Reduced output power and increased toxic emissions (with white smoke emissions), increased engine noise

67

P0191

The pressure sensor signal in the fuel accumulator in the Intermediate Range

The sensor is defective and the output Voltageremains unchanged

Reduced output power and increased toxic emissions (with white smoke emissions), increased engine noise

68

P0088

The pressure in the fuel accumulator exceeds the upper limit

The pressure in the fuel accumulator exceeds 191 Mpa

Reduced power output, increased toxic emissions and white smoke emissions

69

P1089

The pressure in the fuel accumulator exceeds the upper limit

Alarm Burns Cruise control is not It’s working 70% fuel supply limit, fuel cell pressure limit To 80 Mpa

Pressure in FuelsBattery exceeds 180 MPa

Reduced power output, increased toxic emissions and white smoke emissions

71

P0629

Output circuit Pcv1 and SC on battery

The alarm is lit, the cruise control does not work, the fuel supply limit is 70%.

Kz On +В Contacts 152, 153 Pcv1

Reduced output capacity and increased toxic emissions, increased fuel consumption

71

P0628

Chain break Pcv1 and KZ on Mass

The alarm is lit, the cruise control does not work, the fuel supply limit is 70%.

Chain Break 152, 153 Pcv1 or KZ On Mass

Reduced output capacity and increased toxic emissions, increased fuel consumption

72

P2634

Output circuit Pcv2 and KZ on battery

The alarm is lit, the cruise control does not work, the fuel supply limit is 70%.

Kz On +В Contacts 150, 151 Pcv2

Reduced output capacity and increased toxic emissions, increased fuel consumption

72

P2633

Output circuit Pcv2 and KZ to “mass”

The alarm is lit, the cruise control does not work, the fuel supply limit is 70%.

Chain Break 150, 151 Pcv2 or short-circuit on Mass

73

P0629

EMCO of ACB

Power Pcv1 and Pcv2

The alarm is lit, the cruise control does not work, the RTO does not work, the fuel supply limit is 50% and the engine is immediately stalls.

Simultaneous short-circuit on + in wires 152, 153, 150, 151, Pcv1 and Pcv2

Reduced power output, start-up difficulty Engine, increase of flow rate Fuel toxic emissions

73

P0628

Break out Circuit Pcv1 and Pcv2 and KZ on Mass

Alarm Burns Cruise control is not It’s working RTO not Works, Limited50% fuel supply and the engine is immediately Stalls.

Simultaneous break of the circuit 152, 153, 150, 151, Pcv1 and

Pcv2 or short-circuit on Mass

Reduced output power, difficulty starting the engine, increased fuel consumption And Increased toxic emissions

76

P2635

The fuel pump load control circuit is overloaded

Alarm Burns Cruise control is not It’s working Fuel supply limit 70%, OgreLimiting pressure in the fuel cell

To 80 Mpa

Mechanical malfunction of fuel pump in overload conditions

Reduced output power and increased toxic emissions, increased engine noise, engine stalls

76

P1088

The fuel pump control system exceeds the permissible pressure

Alarm Burns Cruise control is not It’s working Fuel supply limit 70%, OgreLimiting pressure in the fuel cell

To 80 Mpa

Excess pressure in Fuel Battery Npc> Pfin+ 15 MPa

Reduced output power and increased toxic emissions, increased engine noise, engine stalls

77

P1266

Fuel pump control without load

To 80 Mpa

Fuel pump control system can not increase the angle of injection

Reduced power output, increased toxic emissions and white smoke emissions

78

P0093

Fuel pump control without load, Including Leaks Fuel

To 80 Mpa

Fuel pump without load, including fuel leakage

Reduced power output, increased toxic emissions and white smoke emissions