Linde Forklifts: Service, Operator’s and Maintenance Manuals PDF

Linde Forklifts: owner’s, service and maintenance manuals, error codes list, DTC, spare parts manuals & catalogues, wiring diagrams, schematics free download PDF

Linde forklifts from Germany are utilized both indoors and outdoors. The firm manufactures a variety of items using electric propulsion systems or piston motors with a forced start. The electrical circuit of the Linde H60D forklift is equipped with a rechargeable battery that enables the engine to start reliably in any weather.

Electric Linde Forklifts

The electric-powered Linde forklift is intended to handle weights between 1200 and 8000 kg. The rear axle of the light-duty trucks of the E12-20 series has two wheels. At the customer’s request, machines can be supplied with a reduced chassis, an expanded base, and various center of gravity positions. Electric forklifts are equipped with maintenance-free AC motors. The driving axle is fitted with disc brakes that are submerged in oil.

Four-wheeled electric E20-80 versions are fitted with hydrostatic steering, powered by a separate pump. The hoisting of the mast parts is driven and regulated by separate electric motors. The traction motors give a top speed of 20 km/h, and the computerized controller allows for step-less adjustment. Hydromechanical brakes are used for stopping.

To maximize productivity or runtime on a single charge, the operator can pick from various driving modes. In addition, the machine’s size allows it to fit into ordinary shipping containers.

A variable displacement axial piston pumping station generates 170 bar of hydraulic operating pressure for the machines’ hydraulics. The oil supply is contingent upon the loader’s modification and carrying capacity. Using electric drives has decreased the noise level at the operator’s station to 50 decibels (A).

Linde diesel and gas forklifts

Linde forklifts with piston power units have a maximum load capacity of 18,000 kg. The design of the cargo mast includes torsion-type dampers, which minimize the amount of unit deformation. The greatest benefit is produced when the load is lifted to a larger height. The hydraulics of the mast is linked to a separate, adjustable pump.

The machines are powered by Cummins or Deutz diesel engines with four or six cylinders and up to 175 horsepower. Volkswagen inline gasoline engines produce up to 92 horsepower. Original design hydrostatic transmission is employed to drive the drive wheels. A separate, engine-mounted hydraulic pump drives the transmission.

An adjustable operator’s seat is installed within the forklift’s open cab. The base is fitted with a vibration-reducing shock absorber. A protective barrier is built above the driver, supported by a sturdy frame. The movement is controlled by two pedals and a steering wheel, while the cargo mast is maneuvered using joysticks.

The 1401 and 1411 series machines, which are suited for outdoor usage, have enclosed cabs with a larger glass area. The cabin foundation is attached to the loader by means of rubber dampers.

Typical faults and repairs for Linde forklifts

Local dealers provide warranty repairs on Linde forklifts.

Common flaws:

1. A driving power reduction indicates a low working fluid temperature or a clogged clutch mechanism. Heating the fluid and correcting stuck mechanisms constitutes repair.
2. If the oil level is low or if the radiators are damaged, the temperature of the fluid will rise. Therefore, it is necessary to inspect the system, repair any broken components, and clear the lines of filth. In addition, it is not advised to operate at high engine speeds.
3. The hubs will heat up during movement if the bearings are broken, or there is no lubricant. Defective components are replaced, tightening adjustments are made, and the oil supply is supplied.
4. Noise emanating from the drive axle indicates worn components or increased differential mechanism clearance. Repair involves changing components, correcting the gears’ position, and adding oil.
5. Due to worn or overtightened bearings, small space between the gears, and lack of lubrication, the differential case heats up. To restore performance, damaged nodes must be replaced, and the gap must be set.