Pettibone Forklift Service, Owner’s and Operator Manuals PDF

Pettibone Forklift owner’s, service and maintenance manuals, error codes list, DTC, spare parts manuals & catalogs, wiring diagrams, schematics free download PDF

Pettibone Forklift Manuals PDF

American lifting equipment maker Pettibone Traverse, LLC, was established in 1950. The corporation’s corporate headquarters are in Baraga, Michigan, in the USA. Material handling equipment design and production are Pettibone’s exclusive priorities.

Pettibone Extendo 944B

An electronically regulated turbocharged diesel engine with 117 horsepower and compliance with the Euro 4 standard powers the 944B loader. The Dana T12000 Powershift gearbox has three forward and backward speeds and is extra-cooled.

The loader has a 4-ton maximum load capacity and a 13.5-meter maximum lifting height (horizontal extension is 9 meters). A Pettibone Extendo 944B telescopic variant joystick controls the boom extension and the complete hydraulic system. The loader has a tiny 3.8-meter turning radius.

Pettibone Traverse T1258X

A load capacity of 5.5 tons, a maximum lifting height of 18 meters, and a maximum reach of 14.6 meters are all features of the Pettibone Traverse T1258X telehandler. The latter trait is exclusive to this kind of equipment.

The Traverse T1258X’s ability to transfer goods horizontally and vertically is one of its features. The Traverse T1258X boom’s base is mounted in a carriage that slides along the rail within 1.8 meters rather than being statically fastened to the body. As a result, the operator can move the weight horizontally to the desired location and lift it to the necessary height.

The most recent X-series platform sits at the center of the Traverse T1258X telehandler forklift. A Cummins QSF 3.8 Tier 4 Final diesel engine with 117 Horsepower is installed in the engine compartment. The engine and Dana VDT12000 Powershift gearbox are combined (three gear steps forward and one back). The Traverse T1258X telehandler has a 4.35 m turning radius.

Pettibone Traverse T1056X

The Traverse T1056X was built on the newest Pettibone X Series platform, which combines excellent dependability with easier maintenance, simple controls, and clear sightlines for better vision.

The machine’s 4-section boom offers more strength while weighing less since it has molded boom plates and fewer welds. Moreover, the design reduces boom deflection for improved load placement control and precision.

Compared to earlier versions, boom overlap has nearly quadrupled to promote smoother operation and lessen contact pressures on wear pads, extending life. The bottom-mounted outer extension cylinder further reduces the stress on the worn pads by up to 50%. Moreover, this cylinder configuration substantially improves servicing access to internal boom components. Strong extension chains guarantee the stability and endurance of the boom.

Pettibone Traverse T1258X